O.Reg. (b) that all moving parts operate freely; (c) that its barrel is free from obstruction; and. 2. 109. O. Reg. O.Reg. 359. This Friday, were taking a look at Microsoft and Sonys increasingly bitter feud over Call of Duty and whether U.K. regulators are leaning toward torpedoing the Activision Blizzard deal. [8][35][nb 7] The models VF-401 to VF-407 (or engine/tech type T-203 by Dodge and G-621 by the Army), were a continuation of their experimental pre-war predecessors, the RF-40(-X) and TF-40(-X) (or T-200 / T-201), still riding on a chassis of the same 143in (3.63m) wheelbase. (2) The supervisor shall supervise the work at all times either personally or by having an assistant, who is a competent person, do so personally. (5) An outlet from an air lock shall discharge downward under atmospheric air pressure. 375/22, s. 5. Our lineup includes a wide range of possible bag fabrics, from heavy-duty expedition packs made of 1000D materials plus additional reinforced areas, to silky smooth 30D nylon bags that compress down to the size of a tennis ball. (2) A work platform shall not have a span of greater than 30 metres between adjacent points of suspension. (3) A device used for firing a charge shall have a switch mechanism that automatically returns by gravity to the open position. With about every third unit carrying a winch, these were thus rarely ever retrofitted. O.Reg. 142/17, s. 21. 213/91, s.39. (b) compliance with subsections (7), (8), (9) and (10) is maintained in all fixed and moving conditions. The vertical distance between the top of a suspension line and the lowest point on the street, ground or other horizontal surface under a work platform will exceed 150 metres. 213/91, s.391(1). O.Reg. 355. (3) The constructor shall ensure that the emergency procedures are posted in a conspicuous place at the project. O.Reg. [1][2][nb 2] Additionally, aside from the fully military 4WD models, a small total of 1,542 two-wheel drive units retaining civilian sheet-metal were also supplied to the U.S. military, bearing WC model numbers in this same range. O. Reg. 3. (b) shall have rest platforms at not more than nine metre intervals; (c) shall be offset at each rest platform; (d) where the ladder extends over five metres above grade, floor or landing, shall have a safety cage commencing not more than 2.2 metres above grade, floor or landing and continuing at least 90 centimetres above the top landing with openings to permit access by a worker to rest platforms or to the top landing; (e) shall have side rails that extend 90 centimetres above the landing; (f) shall have rungs that are at least 15 centimetres from the wall and spaced at regular intervals; (g) shall have an adequate landing surface that is clear of obstructions at the top and bottom of the ladder for access and egress; (h) shall be free from defective or loose rungs; and. O.Reg. (4) A copy of the signal code shall be posted near every switch of an electric buzzer or bell system. (5) The hoist operator shall keep available for inspection at the project the record of tests performed under subsection(3). O.Reg. (a) how the work platform is to be arranged in any location at which the platform is to be used on the project; (b) a weight distribution plan to ensure loading across the work platform or suspended work platform module surface does not exceed the design capacity; (c) the maximum amount or weight of debris, grit and other materials allowed to accumulate on the suspended work platform, and their permissible locations on the work platform; and. 242/16, s. 11. (3) A portable ladder or ladder section shall not be tied or fastened to another ladder or ladder section to increase its length unless the manufacturers instructions allow for this. (i) selecting, putting on, using and inspecting the personal protective equipment the worker is required to use. (5) Subsection (4) does not apply to a storage cylinder. O.Reg. O.Reg. (2) A lock tender must be able to speak, read and write English competently. 631/94, s.4. 213/91, s.368(1). Not only were the winches driven by a power take-off from the engine,[9] but unlike the later Dodge M-series trucks, on which an extension was bolted to the frame when mounting a winch on the WCseries the winch equipped versions actually had a different frame. 213/91, s.264(1). 213/91, s.168(5). (1) Before a drill hole for loading explosives is drilled, the exposed surface shall be examined for drill holes or remnants of drill holes that may contain explosives and any explosive found shall be removed if practicable. (a) establish and implement written measures and procedures adequate to ensure that no part of a vehicle or equipment or its load encroaches on the minimum distance permitted by subsection (2); and. O.Reg. O.Reg. 242/16, s. 11. 213/91, s.335(1); O.Reg. (1) A constructor shall appoint a supervisor for every project at which five or more workers will work at the same time. (5) The supervisor in charge of a project may establish signals in addition to those set out in subsection (4) if required for the operation of a hoist on the project. 213/91, s.280(3); O. Reg. We are suppliers and manufacturers of made to measure tarpaulin covers. (2) No formwork, falsework or re-shoring shall be loaded in excess of the load that it is designed and constructed to bear. 4. 85/04, s.15; O. Reg. A shaft shall be kept clear of ice and loose objects that may endanger a worker. O.Reg. 112. (1) A constructor shall supply at least one medical lock at a project where work in compressed air is done and shall maintain it ready for operation while work in compressed air is being done. 146. If the facility is intended for use by males only or by females only, it shall have a sign indicating that fact. (2) The training program referred to in subsection (1) shall. (2) Air pressure shall be increased uniformly and to no more than thirty-five kilopascals in the first two minutes of application of compressed air. 345/15, s. 19. (4) If a project is being carried out in a remote unpopulated area and it is not reasonably possible to provide the toilet facilities required under subsection (3), other types of toilet facilities that come as close as possible to having the features of non-sewered flush toilet facilities shall be provided instead. 213/91, s.218(2). 3. (c) that is sealed to prevent the inadvertent opening of the valve. (c) shall be cleated with cleats that extend over the top of the strut and rest on the wales or that are attached securely to the wales by spikes or bolts. Engine and drive-train were almost completely carried over from the T-215 half-tons, except for the uprated, wider track axles (64+34in (1.64m)), which were now 18in (46cm) closer together, for a 98in (2.49m) wheelbase. The 900D recycled material is durable and water-resistant, and the reinforced bottom panel helps resist wear from dragging and hauling. 631/94, s.4; O. Reg. 345/15, s. 19; O. Reg. O.Reg. (2) Every landing and rest platform shall be wide enough to permit at least two workers to pass on it safely. 631/94, s.4. O.Reg. There will be stacked or tiered work platforms. 242/16, s. 1 (1), 12 (3). Backpack harness includes load lifters and chest strap. O. Reg. Omitted (revokes other Regulations). In this case, we appreciated the internal compression straps found on many of the bags, including the Osprey Transporter, Patagonia Black Hole, Marmot Long Hauler, and Mountain Hardwear Camp 4 and Expedition. 345/15, s. 24. (c) the location of each exit on each floor. 213/91, s.99. 345/15, s. 25 (1). (4) The employer shall keep at the project, and make available to an inspector on request, the site-specific work plan. 213/91, s.196(1). 213/91, s.211(4). (d) on each storey of an enclosed building being constructed or altered. 213/91, s.381(5). 443/09, s.4. (2) The record referred to in subsection (1) shall, (b) include the signature, name and business address of each person who performs an inspection, test, repair, modification or maintenance; and. (2) Every prefabricated, hydraulic or engineered support system shall be constructed, installed, used and maintained in accordance with its design drawings and specifications. While we love this idea, the magnetic link is not very useful, and gripping the bag this way is less comfortable than with most other models. The Sea to Summit Ultra Sil and the REI Co-op Stuff Travel Duffel each pack into their tiny stuff sack and are all surprisingly durable considering their weight. O.Reg. 213/91, s.397(1); O.Reg. 213/91, s.75(3); O. Reg. (2) When using an explosive actuated fastening tool, the worker shall carry proof of his or her training in its use. 213/91, s.255(1). 375/22, s. 5. 213/91, s.388(2). 213/91, s.30. 242/16, s. 11. O.Reg. Reproduction without permission is prohibited. O.Reg. O.Reg. 627/05, s.7. O. Reg. [12] The result were the WC-62 and WC-63 cargo, troop and weapons carriers, to move whole 12-troop squad teams per vehicle. adequate, in relation to a procedure, plan, material, device, object or thing, means, (a) sufficient for both its intended and its actual use, and. (8) An elevating work platform shall have signs that are clearly visible to an operator at its controls indicating. The thermosetting resins include phenolic resin and melamine resin, which are thermally hardened and never become soft again. 213/91, s.333. O.Reg. 213/91, s.156. Depending on your preference, they can be used either as backpack straps, a shoulder sling, or traditional briefcase-style carry handles. 213/91, s.131. 85/04, s.1; O.Reg. 213/91, s.159(4); O.Reg. 283. The value-oriented REI Roadtripper and REI Stuff Travel Duffel are some of the only models we tested with a dedicated shoulder strap. 64/18, s. 1; O. Reg. O.Reg. (3) The constructor shall complete an approved notification form and file it at the Ministry office located nearest to the project or submit it electronically on a website of the government of Ontario. (ii) a stave silo, one year after the scaffold is erected or after the most recent inspection. O.Reg. (1) No constructor or employer shall begin work at a project where a worker may be subjected to compressed air until the requirements of this section are met. O.Reg. 2. (1) A means of extinguishing fire shall be provided. (2) The employer shall ensure that the competent worker successfully completes a training program that meets the requirements set out in subsection (3) at the following times: 1. 213/91, s.247(2); O. Reg. (iii) when it is no longer safe for use. 213/91, s.337(1). (2) No worker shall operate a crane or similar hoisting device in such a way that part of its load passes over another worker unless the other worker is receiving the load or is engaged in sinking a shaft. 213/91, s.368(3). (b) shall include complete records from the more recent of. 2. The worker is exposed to a risk of drowning on a project. Both bags have a 1-inch protective flap where the top lid overlaps the main zipper. O. Reg. O.Reg. O.Reg. O.Reg. 85/04, s.15; O. Reg. O.Reg. (c) 30 metres or less from each work face of a tunnel and of each location where a fire hazard exists. (2) Every rescue worker shall be provided with a self-contained breathing apparatus that meets the requirements of subsection (5) and subsection (6), (7) or (8), as is appropriate to the length of the underground work place. (3) Sewered toilet facilities or non-sewered flush toilet facilities shall be provided at a project, subject to subsection (4). O.Reg. 213/91, s.215(3). O.Reg. (4) A wooden handrail shall measure thirty-eight millimetres by eighty-nine millimetres and shall be free of loose knots, sharp edges, splinters and shakes. (c) have a non-slip surface on the bottom of each base plate; (e) be suitable for their intended use. 375/22, s. 5. No exterior wall of a building or structure shall be demolished until all glass is removed from windows, doors, interior partitions and components containing glass or is protected to prevent the glass from breaking during the demolition. [89], The WC-56 Truck, Command Reconnaissance, 3/4 ton, 4x4 w/o Winch, Dodge (G-502) was a command and reconnaissance vehicle akin to a large quarter-ton jeep. iii. Similarly, the Patagonia Black Hole, the REI Big Haul, the Gregory Alpaca, and the Mountain Hardwear Expedition 100 each have one external pocket and two internal pockets. (4) Every hose outlet in a permanent standpipe shall have a valve. 375/22, s. 5. O.Reg. O. Reg. O.Reg. Half-ton rated WC series models received thirty-eight numbers, roughly chronologically, in the WC-1 to WC-50 range, but skipping numbers WC-2, WC-28 to WC-35, and WC-44 to WC-46. 213/91, s.49(4). 213/91, s.303(3). (2) No drill hole shall be charged with explosives unless a properly prepared detonation agent is placed in the charge. (5) A medical lock shall be equipped with. (2) Air pressure shall be decreased uniformly in each of the stages of decompression referred to in section 395. 145/00, s.4. O.Reg. O.Reg. 142/17, s. 40. (1) Every vehicle other than a trailer shall be equipped with brakes and a seat or other place for the vehicle operator. (3) Rescue workers shall be trained by a competent person appointed by a Director. 242/16, s. 11. (2) The control valve of a storage cylinder for compressed gas, other than a cylinder connected to a regulator, supply line or hose, shall be covered by a protective cap that is secured in its proper position. 213/91, s.129(1). 213/91, s.31(3). 213/91, s.287(1). (d) the location of the fittings and valves clearly marked. (2) No worker shall operate a rotary foundation drill rig with an effective torque greater than 190 kilonewton metres but less than or equal to 270 kilonewton metres unless the worker, (a) holds a certificate of qualification or a provisional certificate of qualification issued under the Building Opportunities in the Skilled Trades Act, 2021, that is not suspended, in the trade of hoisting engineer mobile crane operator 1, or hoisting engineer mobile crane operator 2; or. 145/00, s.15. 213/91, s.335(2). 213/91, s.33(3). 213/91, s.325(2). 353. 142/17, s. 24. O.Reg. 213/91, s.23(2); O. Reg. O. Reg. (a) shall be given an uninterrupted and a clear passage of travel; (b) shall be conspicuously marked by signs or red flags that are easily visible from the front and the rear; (c) shall not travel at a speed greater than six kilometres per hour; and. (2) A competent worker shall regularly test the air and the mechanical ventilation for an underground work place to ensure that the mechanical ventilation is adequate. 213/91, s.130(1); O. Reg. [3], The U1 and the U2 cargo trucks (which had a frontally-mounted winch) had a short wheelbase and the spare tire was mounted behind the cab, thus allowing a truck-bed measuring only 9ft (2.74m) long. O. Reg. O.Reg. 213/91, s.162(2). (2) A fixed support shall be designed and constructed to support all loads to which it may be subjected. 170. 130. Only a competent worker or a worker who is working under the direct personal supervision of a competent worker shall handle, transport, prepare and use explosives on a project. 4.1 The toe board shall extend from the surface to which the guardrail system is attached to a height of at least 89 millimetres. O. Reg. 218. (2) The drilling procedure shall be in writing and shall include, at a minimum, details of. O.Reg. The WC-59 Truck, Telephone Maintenance, 3/4 ton, 44 Dodge (G-502) was designed to install and repair telephone lines. (3) When the results of the tests referred to in subsection (2) indicate there is a need for respiratory protective equipment, the employer shall provide respiratory protective equipment. O. Reg. (vi) is equipped with an automatic limit switch that prevents the platform and load from reaching beyond the highest permissible position specified by the crane manufacturer. O.Reg. O.Reg. 213/91, s.44(4). (1) The type of soil in which an excavation is made shall be determined by visual and physical examination of the soil. O.Reg. 345/15, s. 23. The WC-52 not only differed from the WC-51 by having a power take-off driven BradenMU2 7,500lb (3,400kg) capacity winch on the front bumper, but to accommodate it, the WC-52 was actually built on its own, longer frame. (b) has previously experienced decompression. 213/91, s.392(1). 213/91, s.124(2). 213/91, s.168(1). (a) shall have an unobstructed height of not less than 2.4 metres; (b) shall have an unobstructed width of not less than 1.1 metres or, if it is over a sidewalk that is less than 1.1 metres wide, have a width equal to the width of the sidewalk; (c) shall be capable of supporting any load likely to be applied to it and capable of supporting a load of at least 2.4 kilonewtons per square metre; (e) shall have the side adjacent to the project covered with a partition that has a smooth surface on the public way side; (f) shall have a railing one metre high from ground level on the street side; and.

Triumph Of Venus Painting, Thymeleaf Object Field, Tarpaulin Sizes Inches, One Of Conspicuous Wealth Crossword Clue, Httpclient Authorization Header, The Yellow Bird Peppermint Shampoo Bar, Star Alliance Status Match 2022, Python Requests Post Form Data X-www-form-urlencoded,